How to use wiper blades properly?
|First, you should ensure that the wiper portion of the front windshield glass is wiped with natural rubber material. Wiping with the front windshield very dry will scratch the rubber surface due to excessive friction and affect the wiping effect. Therefore, it must be ensured that the front wiper glass surface can use the wiper. Clean up the wiper strips and the attached attachments on the glass surface. Before the automotive wiper works, remove the impurities attached to the glass surface and the wiper strips, because these impurities will increase the gap between the rubber strips and the glass when the wipers are working. The rubbing, thus blocking the rubber or scratching the glass surface appears unclear scraping phenomenon.|
When you park the wiper blade, put the wiper blade upright to prevent the rubber strip from coming into contact with the glass surface. Especially when the car is not in use for a long time, the wiper blade must be set up. When the car is stuck in the parking space, it will fall between the strip and the glass surface. Full of dust and impurities, when using a wiper, these dust and impurities will force friction to scratch the strip or glass surface, thereby affecting the wiping effect; When the car is parked, the engine's large thermal energy rises from the engine cover to the windshield. Evaporation, if you do not lift the wiper blade, it will cause the wiper blade to age faster.
What’s more, you must avoid chemical substances such as glass water and other chemicals will erode the rubber strip and accelerate the aging of the strip. Therefore, the front windshield should be scrubbed with chemical substances as much as possible. Even if used, care must be taken not to bring chemical substances into contact with the strip.