Home > Wiper Knowledge > Content

Knowledge sharing about wiper blades

May 17, 2018

Pay attention to:

Corrosion resistance.

Dial the water-based strong.

Heat, cold, acid and alkali resistance.

A good wiper must have these three characteristics.

 

METO, as the most professional wiper blade manufacture in China., take realizes “the international best brand” and “the customer first choice product” as the enterprise prospect,creates the customer use value take “the best performance-to-price ratio” as the mission. In the domain of wiper blade, Meto are famous for its patent, Product various styles, steady quality and sole multifunction. From universal type to exclusive type and order type, those series products always keep cleanest field of vision and enjoy the driving pleasure for your cars. Meto Insisted throughout take “serves the customer to be satisfied” as the objective, and brings clearly, safety, the comfortable feeling for the driver——Beauty, on the way…

201803051901003503984.jpg

The wipers on the market at present can be roughly divided into two kinds, one is the traditional intermittent wiper, it is also one of the most used now, according to rainfall wiper speed could influence driving view points to adjust the three to four levels;The other is the rain-induced wipers that have been used in the middle and upper class models in recent years. The wipers can adjust the speed automatically according to the rainfall.

 

The high quality wiper will not scratch the windshield while it is perfectly fitted to the windshield, achieving a perfect wiping effect.

In addition, to ensure the safety of the vehicle, the wipers should be replaced every 6 months to 1 year.

F2.gif
F-6L.gif

 

Specifications can refer to the accessory manual, face the wiper in shape with clear identification number, and the connection method basically is to see the strut and wiper arm is how to connect, some arm is screwed to the brush rocker arm, while others are convex locking buckle;Also check whether the rubber strip of the wiper is aging.

 

Approach is to build the wipers, finger touch on the rubber wiper after cleaning, if it is found that leaf aging, hardening, cracking, rubber blade without flexibility, illustrate the wiper is unqualified;Secondly, it is necessary to test whether the speed of the wiper is consistent and whether there is uneven swing or leakage.The wiper can be tested at different speed segments, especially if the wiper maintains a certain speed in the “slow” working condition. Finally check the wiper state.If the contact surface of the rubber is not fully fit with the glass surface, wipe it and produce a water strip or fog surface on the surface of the glass, indicating that the wiper is not qualified.