Home > Wiper Knowledge > Content

How To Remove Rear Wiper Blade

Aug 27, 2020

If you cannot get the rear wiper blade of your vehicle out, it loses its effectiveness over time. It is not necessary to pull out the wiper arm to change the rear - wiper blade for each vehicle type. You can replace the front-rear wipers and the rear front wiper blades in the same way by lifting the wiper arm away from the window, turning the old wiper blade outwards to remove it and turning the new blade out until it snaps into place. 


Of course, changing the rear wiper blade is not for everyone, and for many people, it is more convenient to simply have a professional installer do routine work such as changing the oil. For most drivers, it is best to change the front and rear wiper blades twice a year, but some make it difficult for others. 

11-multifunctinal-rear-wiper-blade

Some installers may replace the entire blade, while others may replace only a rubber insert and some may replace only the blade itself. 


They have decided to remove the only nut that holds the entire wiper unit at the back of the windscreen. You don't want to crack the wiper arm or break the glass, so you have to lift the rear wing far enough from the window to turn the old wiper blade into the arm. It is perhaps as easy as removing the old blade and installing a new one by removing the connector. 


Carefully pull the black plastic cover off the foot of the rear wiper arm assembly. Slide the end of your wiper arm through the opening in the middle and into the new wiper blade. 


Turn the new wiper blade further until it is almost parallel to the wiper arm and the rubber blade points upwards. Continue to turn it until the fixing rod jumps off, and then turn the newer wiper blade so that it points up and down and is at an angle with the back end of the front. 

Once the wipers have been removed from the rear window, slide out the old wiper blade and turn it so that it is perpendicular to the front of the rear window of your car. 


Pass the wiper arm through the rear window so that the rubber blade is turned away from the arm, and then guide it back and forth until it points to the windscreen. 


Turn the blade slightly at an angle away from the wiper arm and continue to turn it until it falls off. Turn it back and forth until the battens are mounted, about 1 / 4 of the way to the windshield, but not too far. 


Insert the mounting brackets into the C-shaped socket and turn the arm with the rear wiper engine to the rear windscreen wipers of the car. 


It is normal that an engine burns out and needs to be replaced after a long time and a lot of use, but this repair is rarely possible or practical. Instead, the engine should be replaced, and if you use an older engine, such as the one in the rear wipers, you will get significantly less wear and tear and are less likely to need to replace it. 


It can be frustrating because replacing the blade is something you can do in just a few minutes, but it can do a lot of damage. 


The good news is that you can now pick them up from Amazon for less than $10, and the instructions for installing the wiper blade are easy to follow, which probably explains why they have a lot of customers who have previously bought and used the blade. 


The Korean-made wiper blade of the Hyundai Tucson is covered with the same rubber as the original that was included in the vehicle. 


Many owners of cars in Germany probably noticed that the brush on the rear windscreen wipers became worthless faster than the brush for the front windscreen wiper. That is why we will primarily talk about how to remove the wiper blade. Consider replacing the Wiper in a VAZ car with a new one with the same rubber and a different brush, such as the Hyundai Tucson or the Honda Civic. 


To replace a worn wiper blade, you don't need many tools, you first have to leave the wipers (or at least the surface that covers the blade) wet and dirty. The easiest way to tell if a new wiper blade is needed is to measure its effectiveness easily when used off the road. 


You can do this by leaving a layer of dirt on the blade for at least a few minutes before and after each use of your wipers. 


When it rains and you see the road in the midst of a shower of rain or snow, it can be hard to see. Your windshield wipers are no longer doing their job and once they are out of service, you will find that you need to watch your road closely to successfully remove this tiny stain on your windshield.